Looking to understand how to....

All about the program

Looking to understand how to....

Postby QuickDraw » 10 May 2015, 02:02

Image
upload images free

I would like the images to fill the block for each one but Not zoomed in.
The one above seems to waste the space given for each image.

If this program can do that then I'll get it.

It just seems to be unnecessarily complicated to me and I can't figure out how to get it to display the thumnails of each picture full and big but with out being zoomed in so that the image of each picture can be clearly be seen.
QuickDraw
 
Posts: 18
Joined: 14 Sep 2014, 21:45

Re: Looking to understand how to....

Postby admin » 10 May 2015, 10:09

Could you please create a screenshot of your Options window?
I will try to advice.
User avatar
admin
Site Admin
 
Posts: 625
Joined: 03 Jun 2014, 19:14

Re: Looking to understand how to....

Postby QuickDraw » 15 May 2015, 02:12

I would have thought you know what's there but sure, anything to help, I like the Video Thumbnails maker so much and would love to get this too if it can do what I am looking for from it. :mrgreen:

Also for some reason the Picture Thumbnail maker is ONLY making one sheet for the images out of the set but there are 28 in the folder I selected and I don't know why it failed to make a page 2 of the images.
I mean what if the set had 100 images in it, shouldn't it make more pages for them from the folder? I selected the entire folder to make the thumbs from and did not select the images individually.

Image
pic host

The Full screenshot
http://postimg.org/image/yndki3jpv/

I can also put the picture set of Jordan Carver on a free file host if you want them to test with and show how you could make the preview thumbs more into what I want. It's a small set and PG13 - No nudity
QuickDraw
 
Posts: 18
Joined: 14 Sep 2014, 21:45

Re: Looking to understand how to....

Postby admin » 15 May 2015, 07:58

Ok.
Picture Thumbnails Maker creates only ONE preview picture for each set of pictures (in a folder, in a zip file). It creates a preview of the source. That is the idea. The same way you do not have each shot from a video file in Video Thumbnails Maker.
But if you want to have each picture to be presented, you can select "Dynamic Matrix" radiobuttnon in "Columns/Rows" section and select "100%" of total count of pictures in a set.

The second question is a bit more complicated.
According yo your screenshot, I would advice to set:
1) "Detect 1-2 sized sets - ..." checkbox ON in "Exceptions" section.
2) Select "Fit desired Tile Width and Crop Heigth" radiobutton in "Framing Rule" section.

If you share your picture set, I could advice more detailed settings.
User avatar
admin
Site Admin
 
Posts: 625
Joined: 03 Jun 2014, 19:14

Re: Looking to understand how to....

Postby QuickDraw » 15 May 2015, 17:04

Cool, I'm guessing this will get me to purchase the full version... :D
QuickDraw
 
Posts: 18
Joined: 14 Sep 2014, 21:45

Re: Looking to understand how to....

Postby admin » 15 May 2015, 22:35

You are welcome ;)

The problem with your source set is some of pictures (7) have "strange" resolution.
Most of them are 1500x1000 or 1000x1500. But some of them (7) have the "strange" width - 999 or 1001.
This is important for the program to detect "Lanscape/Portrait" sets.
If you will remove that pictures from the set, you will get nice results.
If you will change their resolution to 1500x1000 or 1000x1500, you will get nice results too.

I will try to have a look at the code to determine is it possible to add support for such kind of sets to the program.

Thank you.
User avatar
admin
Site Admin
 
Posts: 625
Joined: 03 Jun 2014, 19:14

Re: Looking to understand how to....

Postby QuickDraw » 16 May 2015, 01:12

admin wrote:You are welcome ;)

The problem with your source set is some of pictures (7) have "strange" resolution.
Most of them are 1500x1000 or 1000x1500. But some of them (7) have the "strange" width - 999 or 1001.
This is important for the program to detect "Lanscape/Portrait" sets.
If you will remove that pictures from the set, you will get nice results.
If you will change their resolution to 1500x1000 or 1000x1500, you will get nice results too.

I will try to have a look at the code to determine is it possible to add support for such kind of sets to the program.

Thank you.


Great thanks.

I sent Payment for this through PP. (I did mark it in the details section of that payment.)

What would really be nice (And I don't know if it's possible or not) is to have an option to make more thumbnail sheets from the same folder.
Lets say the folder contains 300 pictures and you want a thumbnail for them all, then you would mark it for multiple sheets and get sheet 01, sheet 02...etc.

Also is it possible to make it create the sheets in a specific size, 1920x1080 or 1500x1000 where you can specify what ever size you wish the thumbnail sheet to be made in
QuickDraw
 
Posts: 18
Joined: 14 Sep 2014, 21:45

Re: Looking to understand how to....

Postby admin » 16 May 2015, 21:59

QuickDraw wrote:Looking to understand how to....
Your first request just has been done in PTM version 2.6.0.2.

QuickDraw wrote:What would really be nice (And I don't know if it's possible or not) is to have an option to make more thumbnail sheets from the same folder.
Lets say the folder contains 300 pictures and you want a thumbnail for them all, then you would mark it for multiple sheets and get sheet 01, sheet 02...etc.
Currently that is not possible. The main idea was not to place all the pictures on a thumbnail sheet. I will take your request into account.

QuickDraw wrote:Also is it possible to make it create the sheets in a specific size, 1920x1080 or 1500x1000 where you can specify what ever size you wish the thumbnail sheet to be made in
You can fit thumbnail sheet size to your screen resolution. Fully custom thumbnail sheet resolution could conflict with other settings easily. So I choosed another approach.
Maybe I will find an elegant way to implement it.
User avatar
admin
Site Admin
 
Posts: 625
Joined: 03 Jun 2014, 19:14

Re: Looking to understand how to....

Postby abcabc » 19 Oct 2015, 19:39

Hello,

I just downloaded Your program Pictures Thumbnails Maker. But, unfortunately, I have no opportunity to use it in full:

- when I click on button in the right top corner (it is noted by a red arrow), nothing happens, and the window does not shrinks. Please advise what can I be done in this situation?

http://img146.imagevenue.com/img.php?im ... 134lo.JPG#

Thanks in advance.

Regards,
abcabc
 
Posts: 3
Joined: 19 Oct 2015, 19:36

Re: Looking to understand how to....

Postby admin » 21 Oct 2015, 20:52

abcabc wrote:Hello,

I just downloaded Your program Pictures Thumbnails Maker. But, unfortunately, I have no opportunity to use it in full:

- when I click on button in the right top corner (it is noted by a red arrow), nothing happens, and the window does not shrinks. Please advise what can I be done in this situation?

http://img146.imagevenue.com/img.php?im ... 134lo.JPG#

Thanks in advance.

Regards,

Hello.
What is the resolution of your screen?
User avatar
admin
Site Admin
 
Posts: 625
Joined: 03 Jun 2014, 19:14

Next

Return to Pictures Thumbnails Maker

Who is online

Users browsing this forum: No registered users and 0 guests

cron